Toggle Clamps, For Alpha 5/8 & MAX
Mount Toggle Clamps directly on the BuildPro Tabletop, Riser Blocks or Econo Stop & Clamping Squares, for the height and reach required for each hold-down application.
* A low-profile, pre-tapped Adjustable Mounting Base available for mounting vertical and horizontal Good Hand Toggle Clamps to fit 5/8″ boreholes.
* Use Mounting Bracket to mount GH-36224 on Alpha 28 Toggle Clamp Mounting Adapter, or mount GH-12265 directly on Alpha 28 Toggle Clamp Mounting Adapter to fit 28 mm boreholes.
More Details
Vertical Clamping
Part No. | Mounting Hole (in) | A (in) | B (in) | C (in) | D (in) | E (in) | Weight (lb) |
|---|---|---|---|---|---|---|---|
GH-12050 | 4 x Ø.20 | 0.89 | 1.3 | 0.38 | 3.74 | 1 | 0.4 |
GH-12050-HB | 4 x Ø.20 | 1.66 | 1.3 | 0.38 | 4.80 | 1 | 0.4 |
GH-12130 | 4 x Ø.28 | 1.25 | 2.8 | 0.63 | 5.5 | 1.4 | 0.8 |
GH-12130-HB | 4 x Ø.28 | 2.25 | 2.8 | 0.63 | 6.5 | 1.4 | 0.9 |
GH-12265 | 4 x Ø.34 | 1.75 | 3.3 | 0.8 | 7.5 | 1.9 | 1.4 |
Horizontal Clamping
Part No. | Mounting Hole (in) | A (in) | B (in) | C (in) | D (in) | E (in) | Weight (lb) |
|---|---|---|---|---|---|---|---|
GH-225-D | 4 x Ø.26 | 1.37 | 2.8 | 0.5 | 6.8 | 1.5 | 0.6 |
GH-225-DHB | 4 x Ø.26 | 2.13 | 2.8 | 0.5 | 6.6 | 1.5 | 0.6 |
Mount any of the first seven Good Hand® Toggle Clamps on a low-profile, pre-tapped Adjustable Mounting Base. (Sold Separately)
Pull / Push
Use Mounting Bracket to mount this toggle clamp on Alpha 28 Toggle Clamp Mounting Adapter to fit 28 mm boreholes. (Sold Separately)
Part No. | Weight (lb) |
|---|---|
GH-36224 | 1.5 |
